扩展表面在相变储热中的强化换热研究进展

doi:10.16046/j.cnki.issn2096-5680.2019.04.003

摘要/Abstract

摘要： 相变储热在节能、电力调峰等领域日益得到关注,然而相变材料热导率普遍较低,导致储热系统热性能较差。文中从强化换热角度出发,对以扩展表面技术强化相变储热单元热量传递相关的翅片、热管、翅片耦合热管或泡沫金属进行了综述。文献分析表明,上述强化换热元件均可显著提升储/释热效率,翅片结构和布置方式会影响相变材料的强化换热效果;热管与相变材料普遍有着较好的相容性,其对相变过程中的均温性较好;翅片耦合热管综合利用了二者之间的传热特性,且热管数量较翅片几何参数对相变材料的凝固/熔化影响更大。在未来研究中,通过拓扑优化获取几何结构更为优异的翅片、热管以及翅片与热管耦合对相变材料传热强化的机理具有重要的研究价值。

关键词: , 扩展表面, 相变储热, 翅片, 热管, 换热效果

Abstract: Phase change thermal storage has received increasingly concern in fields of energy conservation and peak-load regulation.However，generally speaking，the thermal conductivity of phase change materials is relatively low，which leads to poor performances of thermal energy storage system.From the respective of heat transfer enhancement，the research progress of heat transfer enhancement methods for extended surface，including fin，heat pipe，finned heat pipe and fin-metal foam coupling，in phase change thermal energy storage unit is summarized.Through literatures analysis，it can be seen that all of the mentioned heat transfer enhancement elements above could remarkably improve both charging and discharging rates of the phase change material.As for fins，the structure and arrangement ways could influence the effect of heat transfer.Heat pipes have good compatibility with phase change material in universality，and could dramatically improve temperature uniformity during phase transitions.Finned heat pipes utilize the heat transfer characteristics of both，and moreover，the number of heat pipes show greater influence on solidification and melting rates of phase change materials as compared to geometrical parameters of fins.In the future research，there is still important research value in obtaining excellent geometric structure through topological optimization and the mechanism of heat transfer enhancement by heat pipe and finned heat pipe.

Key words: extended surface, phase change thermal storage, fin, heat pipe, heat transfer performance

中图分类号:

TK124

李树谦, 刘子苑, 周晴晴, 于东, 张月. 扩展表面在相变储热中的强化换热研究进展[J]. 河北水利电力学院学报, 2019, 29(4): 16-23.

LI Shu-qian, LIU Zi-yuan, ZHOU Qing-qing, YU Dong, ZHANG Yue. Research Progress of Heat Transfer Enhancement for Extended Surface in Phase Change Thermal Storage[J]. Journal of Hebei University of Water Resources and Electric Engineering, 2019, 29(4): 16-23.

参考文献

[1]冷光辉，曹惠，彭浩，等．储热材料研究现状及发展趋势[J]．储能科学与技术，2017(6):1058-1075.
[2]李允超，宋华伟，马洪涛，等．储能技术发展现状研究[J]．发电与空调，2017(38):56-61.
[3] Guo C X,Zhang W J.Numerical simulation and parametric study on new type of high temperature latent heat thermal energy storage system[J].Energy Conversion and Management,2008(49):919-927.
[4] Medrano M,Gil A,Martorell I,Potau X,et al.State of the art on high-temperature thermal energy storage for power generation.Part 2-Case studies[J].Renewable and Sustainable Energy Reviews,2010(14):56-72.
[5] Zhang H L,Baeyens J,Cáceres G,et al.Thermal energy storage:Recent developments and practical aspects[J].Progress in Energy and Combustion Science,2016(53):1-40.
[6]叶锋，曲江兰，仲俊瑜，等．相变储热材料研究进展[J]．过程工程学报，2010(10):1231-1241.
[7]李传，葛志伟，金翼，等．基于复合相变材料储热单元的储热特性[J]．储能科学与技术，2015(4):169-175.
[8] Yang J L,Xu C,Du X Z.Experimental study on enhancement of thermal energy storage with phase-change material[J].Applied Energy,2016(169):164-176.
[9]程文龙，韦文静．高孔隙率泡沫金属相变材料储能、传热特性[J]．太阳能学报，2007(7):739-744.
[10]龚玮，杨震，段远源．泡沫金属蓄能相变材料的传热数值模拟[J]．太阳能学报，2014(35):1682-1687.
[11]杨兆晟，张群力，张文婧，等．中温相变蓄热系统强化传热方法研究进展[J/OL]．化工进展．https：//doi.org/10.16085/j.issn.1000-6613.2019-0160.
[12] Dhaidan N S,Khodadad J M,Al-Hattab T A,et al.Experimental and numerical investigation of melting of phase change material/nanoparticle suspensions in a square container subjected to a constant heat flux[J].International Journal of Heat and Mass Transfer,2013(66):672–683.
[13] Prabhu B,Amirtham V A.A review on thermal conductivity enhancement of paraffin wax as latent heat energystorage material[J].Renewable and Sustainable Energy Reviews,2016(65):81-100.
[14]刘玉东，李夔宁，何钦波，等．低温纳米复合相变蓄冷材料热物性研究[J]．工程热物理学报，2008(29):105-107.
[15] Wang P L,Lan Z P,Peng Z J,et al.Numerical investigation of PCM melting process in sleeve tube with internal fins[J].Energy Conversion and Management,2016(110):428-435.
[16] Deng S X,Jiang H J,Ye W B.Evaluation and optimization of thermal performance for a finned double tube latent heat thermal energy storage[J].International Journal of Heat and Mass Transfer,2019(130):532–544.
[17] Sharifi N,Bergman T L,Faghri A.Heat pipe-assisted melting of a phase change material[J].International Journal of Heat and Mass Transfer,2012(55):3458-3469.
[18] Tiari S,Mahdavi M.Numerical study of finned heat pipe-assisted thermal energy storage system with high temperature phase change material[J].Energy Conversion and Management,2015(89):833-842.
[19] Saraswat A,Bhattacharjee R,Verma A,et al.Investigation of diffusional transport of heat and its enhancement in phasechange thermal energy storage systems[J].Applied Thermal Engineering,2016:S1359431116310924.
[20] Zhao D L,Tan G.Numerical analysis of a shell-and-tube latent heat storage unit with fins for air-conditioning application[J].Applied Energy,2015(138):381-392.
[21] Merlin K,Delaunay D,Soto J,et al.Heat transfer enhancement in latent heat thermal storage systems:Comparative study of different solutions and thermal contact investigation between the exchanger and the PCM[J].Applied Energy,2016(166):107-116.
[22] Zhang Y W,Faghri A.Heat transfer enhancement in latent heat thermal energy storage system by using the internally finned tube[J].International Journal of Heat and Mass Transfer,1996(39):3165-3173.
[23] Seeniraj RV,Velraj R,Narasimhan N L.Thermal analysis of a finned-tube LHTS module for a solar dynamic power system[J].HeatMassTransf,2002(38):409–417.
[24]李永辉，马素霞，谢豪．管翅式相变蓄热器性能的实验研究[J]．可再生能源，2014(32):574-578.
[25]高轩．Y型纵翅片管式相变蓄热过程模拟与优化[D]．兰州：兰州理工大学，2016.
[26] Sheikholeslami M,Lohrasbi S,Ganji D D.Numerical analysis of discharging process acceleration in LHTESS by immersing innovative fin configuration using finite element method[J].Applied Thermal Engineering,2016(107):154-166.
[27] Saraswat A,Bhattacharjee R,Verma A,et al.Investigation of diffusional transport of heat and its enhancement in phasechange thermal energy storage systems[J].Applied Thermal Engineering,2016:S1359431116310924.
[28] Bai Y C,He X F,Liu Y,et al.Experimental investigation of a solar thermal storage heater assembled with finned heat pipe and collective vacuum tubes[J].Energy Conversion and Management,2018(166):463-473.
[29] Tao Y B,He Y L,Qu Z G.Numerical study on performance of molten salt phase change thermal energy storage system with enhanced tubes[J].Solar Energy,2012(86):1155-1163.
[30] Guo C X,Zhang W J.Numerical simulation and parametric study on new type of high temperature latent heat thermal energy storage system[J].Energy Conversion and Management,2008(49):919-927.
[31] Jung E G,Boo G H.Thermal analytical model of latent thermal storage with heat pipe heat exchanger for concentrated solar power[J].Solar Energy,2014(102):318-332.
[32] Tiari S,Qiu S G,Mahdavi M.Numerical study of finned heat pipe-assisted thermal energy storage system with high temperature phase change material[J].Energy Conversion and Management,2015(89):833-842.
[33] Sharifi N,Bergman T L,Faghri A.Enhancement of PCM melting in enclosures with horizontally-finned internal surfaces[J].International Journal of Heat and Mass Transfer,2011(54):4182–4192.
[34]华建社，张焱，张娇．新型管壳式相变蓄热器的设计与数值模拟[J]．节能，2015(34):24-29+22.
[35]胡志培，李安桂，高然．矩形及楔形装置蓄热性能的对比实验研究[J]．西安建筑科技大学学报（自然科学版），2019(51):134-139.
[36] Wang P L,Yao H,Lan Z P,et al.Numerical investigation of PCM melting process in sleeve tube with internal fins[J].Energy Conversion and Management,2016(110):428–435.
[37] Pizzolato A,Sharma A,Maute K,et al.Design of effective fins for fast PCM melting and solidification in shell-andtube latent heat thermal energy storage through topology optimization[J].Applied Energy,2017:S0306261917314642.
[38] Khaled A R A.Heat transfer enhancement in hairy fin systems[J].Applied Thermal Engineering,2007(27):250-257.
[39] Shabgard H,Bergman T L,Sharifi N,et al.High temperature latent heat thermal energy storage using heat pipes[J].International Journal of Heat and Mass Transfer,2010(53):2979-2988.
[40] Nithyanandam K,Pitchumani R.Analysis and optimization of a latent thermal energy storage system with embedded heat pipes[J].International Journal of Heat&Mass Transfer,2011(54):4596-4610.
[41] Nithyanandam K,Pitchumani R.Thermal energy storage with heat transfer augmentation using thermosyphons[J].International Journal of Heat and Mass Transfer,2013(67):281-294.
[42]毛发，章学来，丁磊，等．热管式相变储能系统蓄/放热性能试验[J]．热力发电，2016(45):48-53.
[43] Nayak K C,Saha S K,Srinivasan K,et al.A numerical model for heat sinks with phase change materials and thermal conductivity enhancers[J].International Journal of Heat and Mass Transfer,2006(49)49:1833-1844.
[44] Robak C W,Bergman T L,Faghri A.Enhancement of latent heat energy storage using embedded heat pipes[J].International Journal of Heat and Mass Transfer,2011(54):3476–3484.
[45] Jaume G,Laia M,Cabeza L F.Materials and system requirements of high temperature thermal energy storagesystems:Areview Part2:Thermalconductivity enhancement techniques[J].Renewable and Sustainable Energy Reviews,2016(60):1584-1601.
[46] Liu Z L,Wang Z Y,Ma C F.An experimental study on heat transfer characteristics of heat pipe heat exchanger with latent heat storage.Part I:Charging only and discharging only modes[J].Energy Conversion and Management,2006(47):944–966.
[47] Khalifa A,Tan L,Date A,Akbarzadeh A.A numerical and experimental study of solidification around axially finned heat pipes for high temperature latent heat thermal energy storage units[J].Applied Thermal Engineering,2014(70):609-619.
[48]陶汉中，刘士琦．热管式组合工质蓄热系统换热特性的数值模拟[J]．可再生能源，2018(36):1890-1896.
[49] Tiari S,Mahdavi M.Numerical study of finned heat pipe-assisted thermal energy storage system with high temperature phase change material[J],Energy Conversion and Management,2015(89):833–842.
[50]喻家帮，牛朝阳，韦攀，等．泡沫金属/翅片填充管蓄热性能的实验研究[J]．西安交通大学学报，2019(53):122-128.
[51]梁林，刁彦华，康亚盟，等．平板微热管阵列-泡沫铜复合结构相变蓄热装置蓄放热特性[J]．化工学报，2018(69):34-42.