河北水利电力学院学报

河北水利电力学院学报 ›› 2024, Vol. 34 ›› Issue (3): 78-84.DOI: 10.16046/j.cnki.issn2096-5680.2024.03.013

• 机械工程专题 • 上一篇    

汽车减速器密封件涂胶工作台结构设计

李鑫亮1, 付颜红2,3, 刘禹2,3, 王伊宁3   

  1. 1.北京南口斯凯孚铁路轴承有限公司,北京市昌平区南大街乙15号 102200;
    2.河北省工业机械手控制与可靠性技术创新中心,河北省沧州市运河区黄河西路49号 061001;
    3.河北水利电力学院机械工程系,河北省沧州市运河区黄河西路49号 061001
  • 收稿日期:2023-12-25 修回日期:2024-05-20 出版日期:2024-09-30 发布日期:2024-10-09
  • 通讯作者: 付颜红(1984-),女,河北沧州人,硕士,讲师/工程师,主要从事机械设计与制造、非标自动化技术研究。E-mail:276501753@qq.com
  • 作者简介:李鑫亮(2000-),男,河北保定人,本科,主要从事机械设计与自动化技术研究。E-mail:csbhrhx6@163.com

Structural Design of the Adhesive Coating Workbench for Automotive Reducer Seals

LI Xinliang1, FU Yanhong2,3, LIU Yu2,3, WANG Yining3   

  1. 1. Beijing Nankou SKF Railway Bearing Co., Ltd., 102200, Beijing, China;
    2. Hebei Technology Innovation Center of Industrial Manipulator Control and Reliability, 061001, Cangzhou, Hebei;
    3. Department of Mechanical Engineering, Hebei University of Water Resources and Electric Engineering, 061001, Cangzhou, Hebei, China
  • Received:2023-12-25 Revised:2024-05-20 Online:2024-09-30 Published:2024-10-09

PDF

摘要： 文中介绍了一种减速器密封件涂胶工作台的结构设计流程,通过自动涂胶代替手动涂胶解决汽车减速器漏油问题;对工作台结构进行计算和有限元分析,通过传感器和气缸的配合,利用气缸压实涂胶的密封件,由电动机带动工件完成涂胶。结果表明:该工作台能够自动完成工件的涂胶和压实工作,不仅能够满足使用要求,降低了工作人员的劳动强度,而且极大地提高了涂胶效率和涂胶品质。

关键词: 涂胶, 气压传动, 结构设计, 工作台

Abstract: Based on the sealing effect and service life of automotive reducers, this article introduces the structural design process of a gearbox sealing component gluing workbench, which solves the problem of oil leakage in automotive reducers by replacing manual gluing with automatic gluing. Perform calculations and finite element analysis on the structure of the workbench, utilize the combination of sensors and cylinders, drive the workpiece by an electric motor to complete the gluing process, and use cylinders to compact the sealing components of the gluing process. The results indicate that the designed workbench can complete the gluing and compaction work of the workpiece, meeting the requirements for use.The use of automatic gluing instead of manual gluing greatly improves efficiency and construction quality, while reducing the labor intensity of workers.

Key words: glueing, pneumatic transmission, structure design, workbench

中图分类号: