[1]李广信.地震与加筋土结构[J].土木工程学报,2016,49(7):1-8.
[2]FHWA-NHI-10-024.Design and Construction of Mechanically Stabilized Earth Walls and Reinforced Soil Slope[S].Washington,D C,National Highway Institute Federal Highway Administration and U.S.Department of Transportation,2009.
[3]NCMA.Design manual for segmental retaining walls[S].3rd Edition,Herndon,VA,USA:National Concrete Masonry Association,2009.
[4]AASHTO.AASHTO LRFD bridge design specifications[S].Washington,DC,USA:American Association of State Highway and Transportation Officials,2012.
[5]中华人民共和国水利部.土工合成材料应用技术规范:GB 50209-2014[S].北京:中国计划出版社,2014.
[6]中华人民共和国交通运输部.公路土工合成材料应用技术规范:JTG/T D32-2012[S].北京:人民交通出版社,2012.
[7]中华人民共和国水利部.水利水电工程土工合成材料应用技术规范:SL/T 225-98[S].北京:中国水利水电出版社,1998.
[8]中华人民共和国铁道部.铁路路基土工合成材料应用设计规范:TB 10118-2006[S].北京:中国铁道出版社,2006.
[9]中华人民共和国交通部.水运工程土工合成材料应用技术规范:JTJ 239-2005[S].北京:人民交通出版社,2005.
[10]包承纲,丁金华,汪明元.极限平衡理论在加筋土结构设计中应用的评述[J].长江科学院院报,2014,31(3):1-10.
[11]Allen TM,Bathurst RJ,Holtz RD,et al.A new working stress method for prediction of reinforcement loads in geosynthetic walls[J].Canadian Geotechnical Journal.2003,40(5):976-994.
[12]Bathurst RJ,Allen TM,Walters DL.Reinforcement loads in geosynthetic walls and the case for a new working stress design method[J].Geotextiles and geomembranes.2005,23(4):287-322.
[13]WSDOT.Geotechnical design manual,M 46-03,Chap.15,Abutments,retaining walls,and reinforced slopes[S].Olympia,Wash.2008.
[14]Ehrlich M,Mitchell JK.Working Stress Design Method for Reinforced Soil Walls[J].Journal of Geotechnical Engineering.1994,120(4):625-645.
[15]Ehrlich M,Mirmoradi SH.A simplified working stress design method for reinforced soil walls[J].Geotechnique.2016,66(10):854-863.
[16]Liu H.Nonlinear Elastic Analysis of Reinforcement Loads for Vertical Reinforced Soil Composites without Facing Restriction[J].Journal of Geotechnical and Geoenvironmental Engineering.2016,142(6):04016013.
[17]Liu H,Won M-S.Stress Dilatancy and Reinforcement Load of Vertical-Reinforced Soil Composite:Analytical Method[J].Journal of Engineering Mechanics.2014,140(3):630-639.
[18]Liu H.Reinforcement Load and Compression of Reinforced Soil Mass under Surcharge Loading[J].Journal of Geotechnical and Geoenvironmental Engineering.2015,141(6):04015017.
[19]Liu H.Required reinforcement stiffness for vertical geosynthetic-reinforced-soil walls at strength limit state[J].Géotechnique.2016,66(5):424-434.
[20]DIBt.German code of practice for the design of reinforced soil structures[S].German:Deutches Institute fur Bautechnik,1997.
[21]Leshchinsky D,Ling H I,Hanks G.Unified Design Approach to Geosynthetic Reinforced Slopes and Segmental Walls[J].Geosynthetics International.1995,2(5):845-881.
[22]Han J,Leshchinsky D.General analytical framework for design of flexible reinforced earth structures[J].Journal of Geotechnical and Geoenvironmental Engineering.2006,132(11):1427-1435.
[23]Leshchinsky D,Leshchinsky B,Leshchinsky O.Limit state design framework for geosynthetic-reinforced soil structures[J].Geotextiles and Geomembranes.2017,45(6):642-652.
|